Free delivery
CurrenciesExtensions for washbasin faucets
A washbasin faucet extender raises the tap higher above the bowl. This leaves more room for your hands under the spout, and the stream doesn't hit the edge of the sink. In this section, you'll find brass and copper versions, black and silver, gold and copper, and three lengths: 50, 100, and 150 mm. Before choosing a washbasin extender, check the model description for the connection size, as the thread determines the fit for a specific tap.
€181.32
€120.72
€90.42
€181.32
€120.72
€120.72
€120.72
€120.72
€120.72
€120.72
€181.32
€181.32
€120.72
€120.72
€181.32
€120.72
€181.32
€120.72
€120.72
€90.42
€90.42
€120.72
€120.72
€120.72
€181.32
€120.72
€181.32
€120.72
€120.72
€120.72
€90.42
€90.42
€120.72
€181.32
€90.42
€120.72
Brass and Copper Washbasin Faucet Extensions
An extension is a short piece that you screw between the faucet and the countertop or sink to raise the entire fixture by a few centimeters. You choose three things: length, connection, and finish. The primary material is brass, followed by copper, two alloys that behave predictably in plumbing and can be screwed together with typical bathroom fixtures. Brass predominates in this role because it holds the thread well and accepts almost any surface finish, from black to gold. However, the fit for a specific tap isn't determined by the material, but by the connection thread.
What length of extension should you choose for your washbasin faucet?
You choose the length by measurement, not by eye. Check how many millimeters are missing between the spout and the top edge of the bowl to allow your hands to fit comfortably, and then raise the faucet by that amount. In this section, the dimensions are listed in three sizes: 50, 100, and 150 mm, and for some models, the length can be found in the product description. Aim for the measured difference, not the maximum, because a spout placed too high will spray water across the countertop and mirror. With a countertop sink, the difference is greater than with a recessed bowl, because the entire bowl sits on top and raises the rim by its own height. With an undercounter bowl, an extension is rarely needed, because the rim remains below the countertop.
Does a faucet extension fit every faucet?
The connection size is the number one question here. The two parts must screw together without an adapter. We don't provide thread size in the parameters or names, so check the description of your chosen model or contact us with the product number, and we'll respond to your specific needs. If you're adding an extension to a faucet you already have, please have your faucet details ready: manufacturer, model, and connection size from under the sink. When replacing the entire set, it's easier to select both components at once, because then you'll know the thread size on both sides. You can immediately match the faucet and extension with items from the washbasin faucets section.
How to match the color of the washbasin extension to the rest of your fixtures
Surface area is the second criterion after size. Washbasin faucet extensions are visible just below the faucet body, so the color must match the rest of the fixtures. You can choose from black, silver, gold, copper, and bronze, and surfaces can be brushed, polished, powder-coated, lacquered, or patinated. Brushing scatters light and shows water marks less, polishing produces a high shine and requires more frequent wiping, while powder coating maintains a uniform, matte shade. Match the finish to the faucet, not the countertop, as the two elements touch each other and any shade difference is striking up close. It is easier to match the shade when you combine it directly with the other metal at the sink, i.e. withsink plugs andsiphons Sink faucets. Hard water deposits accumulate on the extension spout faster than on the faucet body itself, as this is the lowest point where water flows. Wipe it with a damp cloth and dry it, and keep detergents and scouring pads away from the finish.
When you need an extension spout for your bathroom faucet
The most common reason for purchasing a sink is a countertop sink. A sink placed on the countertop raises the rim by a few centimeters, while the faucet remains at its original height, and the clearance between the spout and the top of the sink becomes too small to comfortably wash your hands under it. A bathroom faucet extension solves this problem by replacing a single component instead of the entire set, so the cost and labor are incomparably lower. The second scenario is a renovation, where the sink itself is replaced with a taller one, while the faucet remains the same. The question of whether an extension is compatible with a freestanding faucet comes up with both of these systems, because in both of them, the faucet sits in the sink or countertop opening. You can find the rest of the equipment for this area in the bathroom accessories section.
Frequently asked questions about washbasin faucet extensions
◆ What is a washbasin faucet extension for?
It raises the faucet higher above the sink. sink, so there's more room for your hands under the spout, and the stream hits farther from the edge of the bowl. It's most often purchased for a countertop sink, where the bowl sits on the countertop and raises the water level by a few centimeters. Instead of replacing the entire fixture, you add a single element between the faucet and the countertop.
◆ What lengths are the faucet extensions in this category?
The dimensions here are available in three sizes: 50, 100, and 150 mm. For some models, the length is listed in the product description instead of the parameters, so check there before ordering. Choose the value closest to the difference you measure between the spout and the rim of the bowl.
◆ What thread size does the faucet extension have?
The connection size is not listed in the parameters or model names, so check the description of the selected item or ask us for the specific product number. This is the only parameter that determines whether the element will fit your faucet. When replacing the entire set, it's easier to choose the faucet and extension at once.
◆ What material are these extensions made of?
Brass and copper. You won't find plastic, stainless steel, or aluminum in this section. The palette includes black, silver, gold, copper, and bronze, so you can match the shade to the faucet you already have.
◆ What's the difference between a free-standing faucet extension and a wall-mounted faucet extension?
A free-standing faucet sits in the sink or countertop opening, so it extends vertically upward. A wall-mounted faucet extends from the wall, extending the spout or connection there—a completely different element. For this reason, a wall-mounted faucet extension is not a replacement for the one under a free-standing faucet. Check the mounting method in the model description before ordering.
◆ Which extension should I choose for a countertop sink?
Measure the height of the bowl placed on the countertop and compare it with the clearance left under the spout. Cover the gap with the closest extension, keeping in mind that a spout that is too high will spray water. For deep countertop sinks, the upper end of the range is more often used, while for shallow ones, the shortest end is.