Free delivery
CurrenciesKnockers
Furniture knockers are small fittings in distressed finishes, from antique bronze through black and silver to iron, with nickel and matte black as a cooler alternative. They're used on stylish fronts: dresser doors, display cabinets, nightstands, and renovated sideboards. Most are attached with a single screw, so when replacing the fittings, a single hole in the front is enough.
€5.25
€8.30
€4.32
€3.89
€5.37
€4.32
€7.62
€8.35
€6.32
€3.89
€5.26
€3.89
€7.87
€3.89
€9.24
€5.25
€7.45
What shapes do furniture knockers come in: round, knob, oblong shape?
The shape determines how much space the fitting will take up on the front and how you'll grab it, so that's where you start your selection. The round shape gathers the most models in this section: a disc or ring with a roughly circular outline, flat enough to avoid catching your sleeve when walking past the furniture. A knob provides a single grip point and fits narrow doors, where a wider handle would take up the entire width. The oblong shape protrudes more and more clearly indicates the opening direction. Furniture knockers are small and clustered around a circle, without the long handles known from kitchen fronts, so on a wide drawer they will fall out in pairs rather than individually. The circle itself in other styles and materials is collected in a separate section round furniture handles, and a wider selection of single-point forms is among knobs for Furniture.
Furniture knockers in antique bronze, black, and nickel
The finish sets the overall tone of the hardware, because with this scale, you see the color before the shape. Aged shades take center stage here: antique bronze, antique black, antique silver, antique gray, antique iron, and antique gold. They are united by a subdued sheen and darker recesses that highlight the cast pattern. Nickel, including brushed nickel, and matte black keep the cool side. Antique finishes are chosen for furniture after renovation, while nickel and matte black are chosen for a solid front, because on a smooth board, the aged detail looks like accidental. The bodies are metal, some with a lacquered surface. Antique bronze door knockers have their own, broader section: antique bronze furniture door handles.
What furniture is a furniture knocker suitable for?
A furniture knocker naturally fits on a styled front: a dresser door, a display cabinet, a nightstand, or a renovated sideboard. It also works well on a drawer in the bedroom and on a cabinet door in the living room, where the fittings are viewed up close every day and where detail has a chance to make an impact. On a modern panel without a visible handle, this type of fitting looks unfamiliar because its design comes from a completely different style; in such an interior, it is better to reach for a wider selection of retro fittings, where next to the knockers there are knobs and oblong handles in the same note. When renovating furniture, start by checking the hardware: the trace of the old mounting will indicate whether the new mounting will cover the holes or whether they will need to be filled in.
How to install furniture knockers on the front of a dresser
The knocker is usually attached with a single screw through the board, so replacing the hardware in an old piece of furniture requires only one drilling. The furniture knocker handle doesn't have to fit into two pre-made holes, which saves the front where the previous hardware had an unusual screw spacing. Single items have a two-point mounting with a 32 mm spacing, and only with these should you measure the distance between the hole centers before purchasing, from the center of one hole to the center of the other, never from the edge of the hardware. Drill the hole with a drill bit thinner than the screw, and place a piece of board underneath to prevent the drill from tearing out the veneer when exiting. Tighten the screw gently: in a thin board, it's easy to overtighten the thread, and then the hardware starts to rotate.
How much does the door knocker protrude from the front and when should you check it?
The distance from the front, or how much the hardware protrudes from the board, is between 11 and 22 mm. This isn't much for a component gripped with your entire hand, so the door knocker doesn't extend beyond the cabinet's outline as a handle would. Check this dimension when the front is adjacent to the door frame or the side wall of the cabinet, because when fully opened, the hardware will strike first. The width of the hardware itself ranges from 35 to 58 mm, and the length from 36 to 69 mm, meaning the entire piece fits in your hand and doesn't divide the front in half. On narrow doors, leave a margin on both sides so that the hardware doesn't touch the edge of the panel.
How to clean antique-finish knocker handles
A soft, slightly damp cloth and drying immediately after cleaning are sufficient. Scouring powders, steel wool, and polishing pastes remove the darker recesses that underlie the aging effect, so after one such cleaning, the fitting no longer matches the rest of the set. Wipe off any water from the fitting immediately, as drops that dry on the front will leave streaks on the panel, not the metal. Painted surfaces do not tolerate solvents or preparations for non-ferrous metals; Unscrew heavily soiled hardware and wash it separately, instead of pouring the cleaner onto the front.
Frequently asked questions about furniture knockers
◆ What is the difference between a furniture knocker and a door knocker?
Scale and mounting location. The furniture knocker in this section is 35 to 58 mm wide and 36 to 69 mm long, meaning it fits in your hand and fits onto the cabinet front. A door knocker is much larger and is mounted on the entrance door; this category does not include such fittings.
◆ What front does a door knocker look good on?
For stylized fronts: a chest of drawers, a display cabinet, a nightstand, a renovated sideboard. It also works well on a bedroom drawer and on a living room cabinet door, where the fitting is viewed up close. With a handleless front and minimalist design, it becomes an extraneous element.
◆ Is a knocker suitable for a chair?
Only if the chair has a flat element with access from the other side, as the knockers in this section are screwed through the panel. No item in this section is described as seat fittings, so check the thickness of the element and the distance from the front, which here ranges from 11 to 22 mm. This type of installation is possible for solid wood backrests with an accessible reverse side.
◆ Does the knocker require two holes in the front?
Most often, because the mounting point is single-point. Single items have two points spaced 32 mm apart, and you measure the distance between the hole centers before purchasing. Furniture knocker handles without a specified spacing value are considered single-point, and the value in the selected item's description is always decisive.
◆ What finishes are available for furniture knockers?
Antique shades predominate: bronze, black, silver, gray, iron, and gold. Nickel, including brushed nickel, and matte black are on the cooler side. Antique shades are chosen for furniture after renovation, while nickel and black are chosen for a solid front.
◆ How far does the door knocker protrude from the front panel?
The gap is between 11 and 22 mm, which is not much for a hand-held fitting. The furniture knocker handle doesn't protrude beyond the cabinet's outline like a handle would. Check this dimension when the front is adjacent to the door frame or the side wall of the cabinet.