Free delivery
CurrenciesAluminum handles
Aluminum furniture handles weigh less than steel or brass handles of the same shape, so they fit both lightweight board fronts and doors that are opened dozens of times a day. You'll find long profiles, edge models, knobs, and recessed handles, most often in black, silver, and gold. Aluminum allows you to create a long handle for several fronts at once, and such a profile doesn't strain the hinges.
€22.44
€199.15
€23.22
€11.33
€13.52
€59.08
€11.70
€58.36
€5.39
€4.60
€26.94
€25.41
€152.50
€42.82
€6.48
€12.27
€5.92
€15.00
€24.64
€42.94
€10.50
€7.42
€15.07
€53.63
€6.58
€13.27
€13.05
€155.59
€42.71
€5.01
€25.27
€36.98
€84.52
€55.88
€16.54
€89.47
€41.75
€137.61
€12.04
€64.79
€16.76
€7.29
€67.99
€34.73
€66.30
€36.98
€20.68
€36.98
€29.05
€16.76
Why aluminum handles don't rust and are lightweight
Aluminum is covered with a thin layer of oxide, which seals the metal from air. This is why aluminum furniture handles withstand steam from a hob and humidity in a bathroom better than standard steel. Another characteristic of the material is weight. A half-meter-long aluminum profile weighs as much as a small cast knob, so a wardrobe door doesn't start sagging on its hinges after a season. For the same reason, it can accommodate strips over a meter long that no one would make in brass. The surface is almost always coated: varnish, powder coating, or anodizing, so the color doesn't show through on the bare metal.
Which finish should you choose for an aluminum handle?
Three finishing methods create three different surfaces. Powder coating leaves a thicker and scratch-resistant layer, varnish a thinner and smoother one, and anodizing hardens the metal surface itself, leaving a cool tone without any additional coating. This is complemented by the surface texture: brushing leads fine scratches to one side, matte disperses light evenly, and polishing produces a mirror-like shine. On hardware touched every time you open the cabinet, matte and brushed finishes forgive fingerprints, while gloss shows every smudge. In shades, you have black, silver, white, brown, gray, and gold. Silver blends into gray fronts, black maintains contrast against a light panel, and gold enhances the warm wood. The color resides not in the metal itself, but in the coating, so powder or a steel wool pad removes it along with the varnish; all that's left is a damp wipe and drying.
Where do aluminum handles for kitchen cabinets fit?
In the kitchen, the first criterion is practical: the smoother the shape, the fewer places where grease collects. Therefore, a profile with a smooth surface, without grooves or gaps, wins over the sink and by the oven. On a drawer with pots and pans, you should use a handle that extends at least halfway across the front so that the drawer opens evenly, not slanted. On narrow columns and doors, a knob or short profile will suffice. In ceiling-high cabinets, one long strip instead of five short handles creates a more balanced front, and the lightness of the material allows it to be mounted even on thin-panel doors. In bathrooms and laundry rooms, aluminum furniture handles are more reliable than standard steel because they don't corrode. What's great about a wardrobe is that the long handle runs the entire height of the door, so you can reach it from any position.
What length of aluminum handle should you choose for the width of the front?
The width of the front determines the length, as it determines whether the drawer will slide straight out. Aluminum doesn't penalize for length, so instead of two short handles on a wide drawer, you can place one profile running across most of the front. The drawer then opens evenly regardless of where you grab it. On narrow doors, the opposite principle works: a long handle takes up the entire width, making the furniture feel heavy. A knob is measured by its diameter, not its length, and the choice is simple: a smaller one is enough for the door, a larger one looks better on the wide front of the chest of drawers. You can also choose the shape without considering the raw material, in separate sections: oblong handles, edge handles and furniture knobs. Aluminum is common here, and you reach for the shape in the second step.
How to measure the spacing before replacing an aluminum handle
Aluminum furniture handles are most often purchased as a replacement for something already hanging on the front, so you measure the screw spacing before choosing the design, not after. Place the measuring tape on the centers of the holes, because measuring from the ends of the handle overestimates the result by several millimeters. Your result should be within one of the dimensions that the furniture industry has been repeating for years: 64, 96, 128, 160, 192, and 320 mm. A spacing that doesn't match the old fitting means new drilling and two holes to cover, and in a finished kitchen, such a correction is the most expensive. An aluminum knob sits on a single screw and doesn't specify any spacing. A meter-long or longer strip is often screwed in three or four places at once, so a single number in the name doesn't solve the problem: the full hole pattern is provided in the drawing included with the model. For a corner cabinet, check how far the profile protrudes from the cooktop, as this measurement determines whether the door will fully extend.
Frequently asked questions about aluminum handles
◆ Are aluminum handles suitable for kitchens and bathrooms?
Yes, and for two reasons. Aluminum doesn't rust, so the profile can withstand steam above the cooktop and constant moisture near the sink. With the same shape, it also weighs less than steel and brass, so a long strip doesn't weigh down the hinges of a tall door. In the kitchen, choose a smooth, groove-free shape, as you can wipe it clean with a single wipe.
◆ Which aluminum finish shows fingerprints the least?
Matte and brushed. Both surfaces scatter light, so a greasy mark becomes a lighter streak instead of a sharp imprint. A polished sheen has the opposite effect: it reflects the light source pointwise and sharpens each streak. Anodizing creates an intermediate surface, cool in color and hardened.
◆ What is the spacing of aluminum furniture handles?
Repeatable values are 64, 96, 128, 160, 192, and 320 mm, and you compare them with the dimensions taken from your own front. Measure from the center of one hole to the center of the other, not from the ends of the handle. Models fastened with a single screw don't have a spacing, while the longest strips have three or four mounting points, so you can find the template in the product drawing.
◆ How long can an aluminum furniture handle be?
From a few centimeters to three meters. A profile longer than a meter usually goes on several adjacent fronts at once, so that the installation reads as a single line, not a row of separate fittings. With this size, weight is everything, so meter-long and longer strips are made of aluminum, not cast.
◆ How should I clean aluminum handles to avoid damaging the coating?
A damp cloth and a little dish soap, followed by a dry wipe immediately after washing. Powders, hard sponges, and steel wool come off with the paint and powder coating, and with them with the paint, so they come off. Wipe a brushed surface along the polish, not across it, as a crosswise mark will be immediately visible.
◆ Which aluminum handle should you choose for a drawer, and which one for a door?
For a drawer, choose an oblong handle because you'll be pulling it towards you along with the contents and need support for your entire hand. For doors and narrow posts, a knob or edge profile screwed to the very edge of the front will suffice. You can choose a recessed handle where you want the front to be smooth, but it requires a slot milled into the board.
Check out the latest posts on our blog
- ↗See what they look like Scandinavian style furniture
- ↗Discover brass handles in their natural version
- ↗Choose boho style in your interior and add a touch of freedom to your home.